Christmas Card Wreath

I was looking for a fun and creative way to display Christmas cards, and this is the best idea I have come across so far! Seemed pretty simple, and really adorable. Here is the original idea. Enjoy!

Materials:
-anchor wire ($4 at Ace Hardware)
-wire cutter
-wooden clothespins ($2 at Walmart)
-wooden beads (if you can find them in red and green, awesome, otherwise, you can paint them)
-red, primary green, and evergreen acrylic paint ($0.50 each at Michael's)
-paint brushes
-red Christmas ribbon ($1 at Target)
-hot glue gun (optional, only needed if the ribbon can attach on its own)

1. Paint half of the clothespins primary green. I painted the top and sides, let them dry about 30 minutes, and then painted the bottom and inside.

2. Paint the remaining half of the clothespins evergreen.

3. Paint half of the wooden beads red, and half of them green. Obviously if you were able to find wooden colored beads, you can skip this step. I recommend painting the top half of the bead, letting it dry, and then painting the bottom half.

4. Once the clothespins are dry, string one onto the wire through the spring in the center, making sure the side that clips faces away from/to the outside of the wreath.As a note, the original wire I got for this project was bead wire. Don't get that--it's too stringy and won't hold shape well for the wreath. It has to be a wire that is sturdy and malleable, but can still hold its shape.

5. Then, string a wooden bead onto the wire.

6. String the other green clothespin onto the wire through the spring in the center.

7. Continue to string alternating colors of wooden beads and clothespins until you reach your desired size. For example, primary green clothespin, red bead, evergreen clothespin, green bead, etc.

 8.  All right, this next step gets a little hairy, so take note. When you reach the size you want, make sure that both ends match up in the pattern of alternating clothespins and bead.

Whichever end has the bead on it for the end, you will take the opposite wire and thread it through like so.

Now, pull the wire nice and taut, so that  the beads and clothespins are relatively stable and don't spin.

Next, twist the wire together below the bead.

Finally, bring both wires together and fold into a loop (you will use the loop to hang the wreath on a nail or hook). To secure, twist the wire at the base of the loop.

9. Attach the Christmas bow to the wreath. The ones I bought had twist ties on the back, so I twisted it on. For some ribbons, you may have to use a hot glue gun.You can hide the hanging loop by securing the ribbon on the top of the wreath, but I liked the look visually of the ribbon better on the bottom of the wreath.

10. Clip your Christmas cards to the clothespins! I will post a picture of that when it's hanging, and I have some cards to put on my wreath. :)

Hair Straightening 101

I have a confession to make. I am pretty bad at doing my own hair. Partially it's due to the fact that I don't have the time or energy to do my hair in the morning before work, and partially I don't know too much beyond the basics (i.e. braiding, ponytails, buns, etc.). But, I do like to experiment when I DO have the time. By request, this is how I straighten my hair on days I am not being lazy. As a note, straightening should not be done every day, as it can dry out and damage your hair. I recommend if you are going to straighten even a couple times a week is to apply a heat protection/anti-frizz hair product before blow drying and/or straightening. Two good ones I have used are Frizz-Ease and Garnier Fructis Sleek & Shine Anti-Frizz Serum. As a nice bonus, the Garnier one smells like apples!

Materials:
-hair straightener (I have a small barreled, skinny one that I also use for curling!)
-comb
-brush
-hair clip (claw clip)
-finishing gloss spray (I recommend Garnier Brilliantine Shine Strong gloss, which can be found at most drug stores)

Before being straightened

 1. Part your hair down the middle. As if you were going to put your hair up in a half ponytail, take your thumbs and draw them just above the ears from the front of your head where your hairline starts to the back of your head where they meet in the middle. Take all of the hair and twist it up and clip it to the top of your head, so it's out of the way.

2. Brush out the bottom half of your hair, and part it in half. Starting from the front of your hair, take a small section of hair and straighten from as close to the root you can possibly get, slowly drawing the straightener down from root to tip. A good rule of thumb is to continuously draw the plate down, not stopping. If you stop, you will get a crimp in your hair, which would be counter-productive!

Continue to straighten from the front all the way around to the back. By having your hair divided in half, this process goes much easier, and it's easier to reach without making your arms tired!

3. Take the clip out, and let your hair down. Now, you are going to section your hair off again, but this time a little higher. Take your thumbs again and draw them just in line with your eyebrows from the front of your head where your hairline starts to the back of your head where they meet in the middle. Take all of the hair and twist it up and clip it to the top of your head, so it's out of the way.

4. Brush out the bottom half of your hair, and part it in half. Starting from the front of your hair, take a small section of hair and straighten from as close to the root you can possibly get, slowly drawing the straightener down from root to tip, just as before.

5. Take the clip out, and let your hair down. Brush out your hair, and part it in half. Starting from the front of your hair, take a small section of hair and straighten from as close to the root you can possibly get, slowly drawing the straightener down from root to tip, just as before.

6. Once you have finished straightening, spray 3-5 sprays of a glossing spray into your hands.  Gently apply by finger combing through hair from root to tip. Doing it this way makes sure to coat all of hair, and not just have it concentrated in one area.

After straightening

P.S. As a bonus, if you are in a big hurry and need to take that hot flat iron with you, don't forget to check out my related post on a DIY flat iron cover, so you can throw that bad boy in your bag and go!

DIY Christmas Ornaments

This was a really simple idea for making your own Christmas tree ornaments that I saw on Pinterest. So here is the original idea. I actually will have a part 2 for this post when I find out how exactly to decorate these further (I have a sweet idea in mind), so stay tuned!

Materials:
-glass ornaments (I bought 2 packs of 6, and they were $4.99 ea. at Michael's)
-glitter in desired colors (I used Martha Stewart's line of glitter from Michael's)
-Pledge Floor Care Finish (about $6 at Wal-Mart)
-hooks for hanging ornaments ($2 at Michael's)

1. Take the top off of an ornament. Pour some Pledge into the ornament.

2. Gently swirl the Pledge around in the ornament, coating it entirely and thoroughly, and try to avoid making bubbles.

3. Pour out the excess Pledge back into its container, once the inside of the ornament is coated.

4. Pour a good amount of glitter into the ornament. And by good amount, I mean like 1/4 of the bottle of glitter.

5. Swirl the glitter around and cover the ornament entirely. You may need to add more glitter to fully coat, if you see gaps.I recommend to add a lot, put your thumb over the hole, and shake vigorously to coat all the way up to the top of the ornament.

6. Pour the excess glitter back into its container.

 7. Clean the outside of the ornament with a warm, damp washcloth, if needed, to remove any glitter or Pledge.

 8. Replace the cap, and repeat for the other ornaments.

9. When finished, add ornament hooks and hang on your tree!